Landscape Lighting

Diamond Core Bit 22mm 22MM DIAMOND DRILL BIT / Used to install 22mm fixtures into pavers or concrete Diamond Tipped 22mm (Approx. 7/8") 5/8" T...

Diamond Bit 60mm 60MM DIAMOND DRILL BIT / Used to instal 60mm fixtures into pavers or concrete Diamond Tipped 60mm (Approx. 2 3/8") 5/8" Threa...

Forstner Bit 22mm 22MM FORSTNER / Used to install 22mm fixtures into pavers or concrete Bormax 2.0 22mm (Approx. 7/8") Made in Germany 3/8" He...

Forstner Bit 60mm 60MM FORSTNER / Used to install 60mm fixtures into pavers or concrete Bormax 2.0 22mm (Approx. 7/8") Made in Germany 3/8" Hex...

The LENS CLEAR allows for separate ACE & HALO lenses to create a different lighting effect from the ACE & HALO fixtures. Produces a w...

Cable Extensions are used to increase the distance between the fixture and the low voltage cable. Can also be used to increase the distance betwee...

The SPIKE 22 accessory makes it possible to install a ground light in a loose surface like soil, gravel or grass. Makes it possible to instal...

The SPIKE accessory makes it possible to install a ground light in a loose surface like soil, gravel or grass. Makes it possible to install t...

BOX 1 has a contemporary design and offers sufficient installation space for the slightly higher LUNA and BIG FLUX. For easy placement of groun...

BOX 100 is only suitable for use with In-lite HYVE, FUSION and FLUX. For easily installing ground lights between paving and gravel Suitable for...

With the arrival of the new SCOPE luminaires, the mounting method has changed, making RISER 350 redundant. RISER 1 is also equipped with a contem...

The RISER 2 is a spacer to increase the height of SCOPE, MINI SCOPE and BIG SCOPE. Used with either a base plate or a ground stake. Height adj...

The Fix 1 is used as a mounting anchor for BLINK and WEDGE. Assembly anchor for installing on wall and stacked elements Suitable for the BLIN...

The PLATE 1 is a cover plate accessory that provides a sleek square style. Compatible with BIG FLUX series and LUNA. Cover plate compatible wi...

The PLATE 75 is a stainless steel cover plate 75 x 75 mm. Cover plate for a sleek, square look & feel Suitable for the HYVE, FUSION and F...

The FIX 4 angle profile makes the EVO HYDE 180 easy to install on masonry or low brick walls and sitting walls. Angle profile for installing ...

The FIX 3 mounting plate makes the EVO HYDE fixtures easy to install on masonry or low brick walls and sitting walls. Assembly anchor for insta...

Give your LUNA ground light the perfect finishing touch with the RING 68 in the color Black. The RING 68 BLACK is made of high-quality anodized a...

The WINK is an accessory that can be used with the low ACE bollard. The WINK is a stylish lens cover for the low ACE bollard This accessory can...

The LENS DIFFUSE is a separate ACE & HALO lens that can create a different lighting effect from the ACE & HALO fixtures. Produces a m...

The KILLFLASH 2 is a raised ring with honeycomb profile to prevent glare from the light source. This accessory can be used in combination with t...

The KILLFLASH is a raised ring with honeycomb profile to prevent glare from the light source. This accessory can be used in combination with the...

SHIELD 2 allows the light from the SCOPE to be shielded on one side to prevent looking directly into the light source. Blocks light source on o...

SHIELD 1 allows the light from the MINI SCOPE to be shielded on one side to prevent looking directly into the light source. Blocks light sour...

SHUTTER 2 allows the light angle of the ACE & HALO UP-DOWN 100-230 volt wall fixtures to be adjusted to any width. Enables an adjustable ...

SHUTTER 1 allows the light angle of the ACE & HALO (UP)DOWN 12V wall fixtures to be adjusted to any width. Enables an adjustable lighting...

The in-lite Easy-Lock connector is supplied as standard with each in-lite fixture.

Cable Caps used to close off the ends of the 14/2 cable. Cable caps for the ends of a 14/2 cable Two pieces included with the transformer Eas...

Cable caps are used to close off the ends of the 10/2 cable. Cable caps for the ends of a 10/2 cable Two pieces included with the transformer...

Cable connector to connect two 12 volt low-voltage cables in a split cable plan. Enables branching in the cable plan Maximum capacity of 50 w...

The SPLITTER allows one light sensor to be connected to several transformers and to switch on the entire lighting plan at the same time. Suita...

The SMART HUB PROTECTOR has been introduced to protect the in-lite SMART HUB-150 transformer installed outdoors from increasingly extreme weather...

The HUB PROTECTOR has been introduced to protect the in-lite HUB-50 and HUB-100 transformers installed outdoors from increasingly extreme weather...

The WATER SWIVEL is an attachment piece to your drill when drilling into paver, stone and concrete. It is used to lubricate and cool the drill bi...