Skip to content
Contact To Purchase

* This product is only available to purchase by phone or email

GATOR EFFLORESCENCE CLEANER will remove any efflorescence stains trapped in the concrete pavers and natural stone pores. It will make the pavers look more clean and vibrant. This efflorescence cleaning is a necessary step before a sealer is applied. The sealer will be able to get a deeper penetration into the now clean pores.

FEATURES:

  • Removes efflorescence from the surface of concrete pavers, wet cast and natural stones
  • Cleans pavers prior to sealing
  • Removes penetrated dirt
  • Restores pavers to their natural color
  • No hydrochloric acid in product
  • Washes off with water

IDEAL FOR:

  • Concrete pavers, slabs and natural stones

COVERAGE:

Ideal Mixture Approximate Surface cleaned
1 U.S. gal. (3.78 L) diluted with 4 U.S. gal. (15.1 L) of water 200 sq. ft (18 sq. m.)
5 U.S. gal. (18.9 L) diluted with 20 U.S. gal. (75.7 L) of water 1000 sq. ft (93 sq. m.)

1 U.S. gallon (3.78 L) of diluted product cleans approximately 40 sq. ft (3.7 sq. m.)

PLEASE NOTE:

  • GATOR EFFLORESCENCE CLEANER should be used prior to applying a sealer to ensure a proper sealer adhesion.
  • Freshly installed Gator Polymeric Sand must be allowed to cure for 48 hours at above 59°F (15°C) and no rain before using GATOR EFFLORESCENCE CLEANER.
  • Do not let product dry up on paver surface.
  • Never use on NEW concrete pavers. Wait at least 60 days after new pavers are installed before using this product.
  • ALWAYS TEST the product on a small hidden area of approximately 4 sq. ft. (0.4 sq. m.) to ensure the results will meet your expectations. Do not apply under extremely strong sun.